HUMIDITY
REVISION
NUMBER
0006-4410D. Taylor
DATE
A
REVISED BY
05/07/01
QUALITY AND SAFETYOPERATING PROCEDURE1.
SCOPE
1.1.
AUTHOR
D. Taylor
D. Taylor
APPROVED
AUTHORIZED
Products and Components CoveredAll products.
1.2. 1.3.
Exemptions None
Definitions (Words defined are italicized and bolded once per section.)
Room Temperature: 73°F ± 3°F (23°C ± 2°C) at a relative humidity of 20% to 70%.
2. PERFORMANCE REQUIREMENTS
Must meet product specification requirements.
3. TEST METHODS
3.1.
Test Environment
Air temperature is 90 ± 2°F (32 ± 1°C) with 90 ± 5% relative humidity.
3.2.
Equipment
A chamber capable of maintaining the test environment. The chamber should not be ofthe “water bath” type that derives its humidity by placing a heater in a body of water at thebottom of the chamber. A Thermotron model SMX-35-5 or equivalent is acceptable.
3.3.
General Test Requirements
Allow samples to stand at room temperature for a minimum of five hours beforeevaluation or additional testing
3.4.
Procedure
Place samples in the chamber for 24 ± 1 hours.
QSOP 0006-4410 A
CPI CONFIDENTIAL - MATTEL, INC. PROPRIETARY INFORMATION
Page 1 of 2
4. HISTORY
4.1.
Significance
A preconditioning to simulate the effects of humidity encountered during transportationand storage.
4.2.
4.3.
QSOP 0006-4410 A
Reason for RevisionRevision PR
Reformat document to merge Fisher-Price and Mattel systems.
Replace the sections of Fisher-Price Reliability Operating Procedure # 3109,
Environmental -- Temperature/Humidity that pertain to high humidity testing and MattelQSOP 0005-0070, Humidity.Removes applicability of this test to components (i.e., corrosion resistance on batterycontacts).Revision AEditorially revised.
§2 adds performance requirement.
Referenced Documents (None)
Page 2 of 2
CPI CONFIDENTIAL - MATTEL, INC. PROPRIETARY INFORMATION
因篇幅问题不能全部显示，请点此查看更多更全内容